Creating and Joining Solid Geometry with Simple Tools in Rhino
Pluralsight
Course Summary
Throughout these lessons, we will explore techniques to create solid geometry from several of Rhino's basic modeling tools such as extrudes lofts, radii, and offset surfaces. Software required: Rhino 5
-
+
Course Description
Throughout these lessons, we will explore techniques to create solid geometry from several of Rhino's basic modeling tools such as extrudes lofts, radii, and offset surfaces. Along the way we will look at analysis tools to ensure our parts are indeed solid and can stand up to exporting to manufacturing ready software and 3D printing. All of our parts will take practical, basic tooling and drafting into consideration and will join and interact with one another in a realistic feasible way. Software required: Rhino 5
-
+
Course Syllabus
Introduction and Project Overview- 1m 22s
—Introduction and Project Overview 1m 22sCreating and Joining Solid Geometry with Simple Tools in Rhino- 5h 38m
—Blocking in the Beginning the Tool Box Tray 10m 20s
—Using Simple Geometry 10m 58s
—Ensuring All Surfaces Intersect Correctly 10m 40s
—Checking for and Fixing Naked Edges 10m 42s
—Building the Main Tool Box Body 10m 58s
—Adding Further Details to the Main Tool Box 10m 23s
—Finishing the Indents and Adding Ribs 11m 12s
—Fixing Minor Errors and Removing Cut Outs 10m 24s
—Adding Details That Will Allow the Locking Clasps to Clip Onto the Main Body 10m 35s
—Finishing the Main Tool Box Body and Starting Work on the Lid 10m 11s
—Duplicating a Locking Loop into the Upper Lid 10m 25s
—Finishing the Cut out Area in the Lid 10m 16s
—Starting the Locking Clasps 10m 27s
—Further Work on the Locking Clasps 12m 26s
—Finishing the Locking Clasps and Adding Protective Ribbing 9m 47s
—Working on the Lid Hinge 10m 29s
—Altering the Position of the Hinge 11m 0s
—Drawing and Cutting Further Details 10m 13s
—Creating Internal and Offset Surfaces 11m 28s
—Adding Details to the Handle Area 11m 0s
—Checking Solid Integrity with Analysis Tools 10m 15s
—Taking Basic Tooling into Consideration 10m 22s
—Building the First Elements of the Handle 10m 9s
—Creating the Main Part of the Handle 10m 36s
—Finishing the Handle Grip Details 10m 51s
—Continuing Work on the Upper Lids 10m 41s
—Accommodating the Clasp and Adding Surface Details 11m 29s
—Starting Work on the Hinges to Hold on the Upper Lids 10m 33s
—Using Simple Splits and Rebuilding Surfaces 10m 33s
—Finishing the Hinges and Adding One Final Clasp 10m 38s
—Rebuilding the Upper Lid Clasps 11m 3s
—Demonstrating Rotating Parts and Functionality 7m 25s
This course is listed under
Industry Specific Applications
Community
Related Posts:
